チタン:武器に欠かせない素材

Oct 23, 2021

チタン:武器に欠かせない素材



チタン合金は、武器産業で広く使用されており、不可欠な材料になっています。 チタンによって、武器はより強力になりました。 チタン合金兵器は、軽量で機動性に優れているだけでなく、威力も向上しています。 彼らは特に空挺部隊と突撃部隊に適しています。 チタン合金モルタルシートプレートは、鋼板よりも50%以上軽量です。 チタン合金は、モルタルチューブ、シートプレートの製造に使用され、バレルや銃架などの高品質の材料も、防護服やヘルメットを準備するための優れた材料です。


1940年代半ばにチタンとチタン合金が工業生産されて以来、米国とソビエト連邦は武器への応用に注目し、研究を始めました。 米国のウォータータウン兵器工場は、武器へのチタン合金の適用において多くの開発を行ってきました。 性的仕事は、武器の分野でのチタン合金の応用を研究するための世界で最大かつ最も進んだユニットです。 1955年、米国の武器産業は57トンのチタン、1961年には281トン、1971年には1,040トンを使用しました。2020年には2,100トンに達すると推定されています。非戦争期間であるため、成長率は速い。


01

砲兵への応用

チタンおよびチタン合金は、大砲の構造部品の製造にとって重要な材料です。 1950年代以降、世界的に有名な大砲で使用されてきました-。 1950年に米国で製造されたM28120mmクロケットリコイルレスガンのバレル、チャンバー、ノズル、および発射ピストンは、Ti-6Al-6V-2Sn-0。5Fe-0。5Cu合金で鍛造および押し出し成形されています。銃全体の質量は68kgで、鋼製銃の104.4kgより34.9%軽量です。 分割後、5人で簡単に持ち帰ることができます。 1961年に、歩兵大隊、空挺部隊大隊、機械化歩兵大隊、戦車大隊を装備した大量生産が開始されました。空挺部隊には、小型、軽量、大出力、高い機動性、簡単なカモフラージュという利点があります。 TI-6Al-6V-2Sn-0。5Fe-0。5Cuは(プラス)タイプの合金です。 焼きなまし状態の機械的特性は、引張強度1098MPa、降伏強度1030MPa、伸び13%、断面収縮率37%、ブリネル硬さ34です。


In the 1970s, Ti-6Al-4V-2Sn titanium alloy was used to make barrels, and Ti-6Al-4V, Ti-7Al-4Mo and Ti-5Al-1.5Fe-1.4Cr-1.2Mo titanium alloys were used to make the gun barrel. , Nozzle and launch piston, the mass of the whole gun is only 49kg, 4 people can resist running forward. After the T66 type 76mm gun's tailstock and gun mount were changed to titanium alloy, it was 93.55kg lighter than steel, only 142.9kg. The titanium alloy frame of the wild cannon is 42 percent lighter than steel. Later, the United States used industrial pure titanium to manufacture the seat plate of the T227 81mm mortar, which was 50 percent lighter than the steel plate, only 10.9kg. The plug of the gun is also made of titanium alloy, which is used to connect the barrel and the seat plate. Hundreds of test shots have been carried out on the ground and on the gravel ground, and good results have been achieved. After the T227 type 81mm mortar was replaced with a titanium seat plate, the mass dropped to 34kg and the range increased to 4500m, while the steel gun had a mass of 42.25kg and a range of 3600m. Not only was the mass reduced by 20 percent , the range was increased, and it was more maneuverable. To improve.


After Japan's 155mm chase mount plate was replaced with Kobe Steel's titanium alloy, the quality was reduced by about 50 percent . The 5mm and 8mm Ti-6Al-4V alloy plates were used for welding. Tests showed that the welding quality is good and can fully meet the combat needs. . The 100mm mortar seat plate made of TA7 alloy in Japan is 10kg lighter than the steel plate. It was designed and finalized in 1981 and produced and installed in 1983. The body, base and bracket of the 82mm mortar installed in 1984 were changed to titanium alloy, which was 16.6kg lighter than steel.


On January 31, 2007, the US "Army Times" stated that the 155mm M777 new type howitzer is the first ground combat system made of titanium alloy, which is about 3150kg lighter than the obsolete M198 type artillery, and its mass is reduced by nearly 50 percent . The decline in the quality of the artillery system has not affected its range and accuracy, but its mobility has been greatly improved.


02

ヘルメット、防弾チョッキ、その他の装備

1959年から1961年まで、米国はTi-6Al-4VおよびTi-5Al-2.5Snチタン合金を使用してM-1標準ヘルメットを回転させましたが成功しませんでした。 その後、彼らはTi-4Al-3Mnチタン合金と爆発成形プロセスに切り替えました。 質量はわずか{{10}}。794kg-1.02kgです。 防弾効果に関しては、チタン製ヘルメットはスチール製ヘルメットと同じですが、チタン製ヘルメットは標準のスチール製ヘルメットよりも0.45kg軽量です。


米国では、10層のナイロンと1層のTi-5Al-2.5Snチタン合金シートで構成される25.4mmの厚さのシートを使用して、防弾チョッキを製造しています。 その質量はわずか3.86kgです。 砲弾、手榴弾、地雷の破片には耐えられますが、7.62mmには耐えられません。 銃弾。


ロシア連合152mmダブル-バレル自走式銃のマズルブレーキ-はチタン合金で作られています。 2つのバレルがあり、起動時に交互に使用されます。 発射速度は速く、火力は強力で、毎分15-18発に達します。 柔軟性があり、オフロード機能を備えています。 強力で強力な存続可能性。


中国は1970年代から兵器製造におけるチタン合金の応用を研究しており、目覚ましい成果を上げています。 対戦車ミサイルのステアリングギアとフレームは、焼鈍状態で使用されるTi-0.2Pd合金であるTC9チタン合金で作られています。 TC4チタン合金製の85型アンチ-航空機機関銃ブレーキは非常に良い結果を達成しましたその後、TC4合金押出バーの代わりに精密鋳造ZTC4合金を使用するとより良い結果が得られ、材料使用率は18から上昇しましたパーセントから94パーセント、そしてそれはまた多くの削減コストを節約し、1つの石で2羽の鳥を殺しました。 TC4は、一般的に使用されているTi - 6Al-4V合金であり、優れた特性に加えて、焼きなまし状態で使用されるタイプを備えています。 チタン製の軽量火炎放射器の射程は最大70mです。 鋼製より3kg以上軽い近距離軽火器です。 工業用純チタン、Ti-3Al-2.5Vおよびその他の合金で作ることができます。